Toshiba T3100e - Page 25

File No.
960-010
5. If the following message is displayed on the screen,
the system may not be set up correctly. Go to the
system setup menu and select the appropriate system
configuration. (see the part 3 for details.) If the
following message is displayed again, go to PROCEDURE
5 .
Video RAM error
CRTC error
6. If the following message is displayed on the screen, go
to PROCEDURE 4.
CPU flag register error
KBC IBF/OBF error
KBC IBF error
KBC self test error
KBC OBF error
CPU register error
ROM checksum error
PIT channel 2 error
CMOS shutdown byte error
DMA channel 0 error
DMA channel 1 error
DMA page register error
Memory refresh error
1st 64KB memory error
Error interrupt controller 1
Error interrupt controller 2
VRAM error
Memory verify error at X:X found X expanded X
Memory
parity error at X:X found X expected X
Error interrupt and stuck NMI
Error interrupts and stuck NMI
Error interrupts and stuck NMI
Error protect mode ...
Error sizing expansion memory
Memory
verify error at X:X:X found X expected X
Memory
verify error at X:X:X found X expected X
Error processor exceptional interrupts ...
Refresh timing error
Error encountered initializing hard drive
First 64KB memory error
LIM page register error
7. If none of the above messages are displayed and you
have a printer port LED, go to PROCEDURE 2.
2-11