Toshiba T3100e - System Board Test Program Execution

File No.
PROCEDURE 3
Test Program Execution
1. Execute the following tests on the Diagnostic Test
Menu. (Refer to Part 3 Test and Diagnostics.)
1. System test
2. Memory test
3. Keyboard test
4. Display test
5. Floppy disk test
6. Printer test
7. ASYNC test
8. Hard disk test
9. Real timer test
960-010
2. If an error is detected during the system test, memory
test, Printer test, ASYNC test, or real timer test, go
to PROCEDURE 4.
3. If an error is detected during the floppy disk test, go
to FDD problem isolation procedures in section 2.5.
4. If an error is detected during the hard disk test, go
to HDD problem isolation procedures in section 2.6.
5. If an error is detected during the keyboard test, go to
keyboard problem isolation procedures in section 2.7.
6. If an error is detected during the display test, go to
display problem isolation procedures in section 2.8.
2-15