3. When the Cleaning start message appears, FDD head cleaning
will begin.
4. When cleaning is finished, the display automatically returns to the
DIAGNOSTICS MENU.
~~
DOC:MAINTENANCE MANUAL
MODEL:T5200
MODEL:T5200C
CHAP:3 TESTS AND DIAGNOSTICS
SECT:3.20, LOG UTILITIES
DOC_ID:3.20 T5200
LANG:ALL
TEXT:
<fig id=MMS\5200\52003_36.TIF>Page 3-36</fig>
3.20 LOG UTILITIES
3.20.1 Program description
The error information is stored in the RAM, while a test is in
progress. And this program can store the error information on a floppy
disk or output it to a printer. This program displays the error
information as the following.
1. Error count (CNT)
2. Test name (TS)
3. Subtest number (NAME)
4. Pass count (PASS)
5. Error status (STS)
6. Address (FDD, HDD 1 or memory; ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name
<fig id=MMS\5200\52003_37.TIF>Page 3-37</fig>
3.20.2 Operations
1. After pressing 5 and Enter in the DIAGNOSTICS MENU, the error
information logged in the RAM or on the floppy disk is displayed as
shown below.
XXXXX ERRORS
CNT TS-NAME PASS STS ADDR WD RD HSTS [ERROR STATUS
NAME]
001 FDD 02 0000 103 00001 00 00 FDD - WRITE PROTECTED
001 FDD 01 0000 180 00001 00 00 FDD - TIME OUT ERROR
_ _ _ _ _ _ _ _ _
³ ³ ³ ³ ³ ³ ³ ³ ³
³ ³ ³ ³ ³ ³ ³ ³ ³
³ ³ ³ ³ ³ ³ ³ ³ ³
³ ³ ³ ³ ³ Address³ ³ ³
³ ³ ³ ³ ³ ³ Read data ³
To Next Page
Loading...
