(3) 2HD:Double-sided, high-density, double-track, 96/135 TPI,
MFM mode, 512 bytes, 18 sectors/track.
2. COPY
This program copies from source floppy disk to target floppy disk.
3. DUMP
This program displays the contents of floppy disks (both 3.5" and
5.25") and hard disk (designated sectors).
3.22.2 Operations
1. After pressing 7 and Enter key in the DIAGNOSTICS MENU, the
following display will appear before program execution.
[FDD UTILITIES]
1: FORMAT
2: COPY
3: DUMP
9: EXIT TO DIAGNOSTICS MENU
PRESS [1] - [9] KEY
<fig id=MMS\5200\52003_40.TIF>Page 3-40</fig>
2. FORMAT Selection
(1) When FORMAT is selected, the following message appears.
DIAGNOSTICS - FLOPPY DISK FORMAT: VX.XX
Drive number select (1 = A:, 2 = B:) ?
(2) Select a drive number. Type the number and the following
message will then appear.
Type select (0 :2DD-2DD, 1 :2D-2D, 2 :2D-2HD, 3 :2HD-2HD) ?
(3) Select a media/drive type number. Type the number and the
message similar to the below will appear.
Warning: Disk data will be destroyed.
Insert work disk into drive A
Press any key when ready.
(4) Remove the diagnostics disk from the FDD and insert the work
disk; press any key.
The following message will appear; formatting is then
executed.
[FDD TYPE]: TRACK = XXX
[FDD TYPE]: HEAD = X
[FDD TYPE]: SECTOR = XX
Format start
[[track, head = XXX X]]
To Next Page
Loading...
