TC Series (TCmini/TC200) Driver
GP-Pro EX Device/PLC Connection Manual
32
Device Setting
To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]
window, select the external device and click [Settings] .
To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add
Device] to add another External Device.
RI/VCC
You can switch RI/VCC of the 9th pin when you select RS232C for SIO type.
It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.
Please refer to the manual of the IPC for more detail.
• Refer to the GP-Pro EX Reference Manual for Indirect Device.
Cf. GP-Pro EX Reference Manual "Changing the Device/PLC at Runtime (Indirect
Device)"
Setup Items Setup Description
Series Select the External Device series.
PC No Use an integer from 0 to 64 to enter the PC No. of the External Device.
*1
*1 In the case of TC200 series or TC200S series, set "0 to 63" when using a communication module, and set "64"
when using RS-232C connector on CPU.
In the case of a TCmini series, the PC number cannot be set.
Setup Items Setup Description
To Next Page
Loading...
Need help?
General
