TCS-NET General Purpose Interface
Setting Tool Manual
6
Toshiba
6-2. Write Operation
The set data of the selected patterns can be written to the GP.
The set data of other patterns in the GP remains unchanged when the set data of the selected patterns is written.
When the set data of the selected patterns already exists, it is overwritten to the new data by the write operation.
The write operation takes time in some cases.
6-2-1. Selecting Patterns
Click the checkboxes of patterns you want to select.
Two or more patterns are selectable.
Click the Toggle All button to select all patterns or cancel selection of all patterns.
If no pattern is selected, an error occurs.
+00DE89308701_01EN_General_Setting_Tool_M.book Page 6 Thursday, November 27, 2008 1:17 PM
To Next Page
Loading...
