Toshiba TECRA A50 series User Manual

99
Mobile Computing
Changing the main battery
Changing the main battery
When your main battery has run out of power, you have two
options: plug in the AC adaptor or install a charged battery.
Never short circuit the battery pack by either accidentally
or intentionally bringing the battery terminals in contact
with another conductive object. This could cause serious
injury or fire, and could also damage the battery pack
and computer.
Never expose a battery pack to abnormal shock,
vibration or pressure. The battery pack's internal
protective device could fail, causing it to overheat or
ignite, resulting in caustic liquid leakage, or explosion or
fire, possibly resulting in death or serious injury.
TECHNICAL NOTE: To avoid losing any data, save your
files and then either completely shut down your
computer or put it into Hibernation mode before
changing the battery.
Removing the battery from the computer
To remove the battery:
1 Save your work.
2 Turn off the computer, see “To Shut down your
computer” on page 45.
3 Unplug and remove any cables connected to the
computer, including the AC adaptor.
4 Close the display panel and turn the computer upside
down.

Toshiba TECRA A50 series Specifications

General

Storage	SSD or HDD options available
Graphics	Intel UHD Graphics or NVIDIA GeForce (varies by model)
Operating System	Windows 10
Battery Life	Up to 8 hours (depending on configuration and usage)
Display Resolution	1366 x 768 or 1920 x 1080 (depending on configuration)
Ports	USB 3.0, HDMI, VGA, Ethernet, SD card reader, headphone/mic combo
Wireless	Wi-Fi 802.11ac, Bluetooth
Processor	Intel Core i5 or i7 (varies by model)