79
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
❖ Built-in display only
❖ Built-in display and external monitor simultaneously
❖ External monitor only
❖ TV and built-in display
❖ TV only*
❖ Primary and CRT*
❖ Dual Mode display*
❖ Swap Image display*
*(Available on certain models)
3 Release the
Fn key.
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then Display.
Choose the Settings tab, click the Advanced button, select
Display Device, select the applicable Monitor type, and click
Apply or OK.
To Next Page
Loading...
