User’s Manual 4-39
TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150 
Using the Hard Disk Drive (HDD) Protection
This computer has a function for reducing the risk of damage on the hard 
disk drive.
Using an acceleration sensor built into the computer, TOSHIBA HDD 
Protection detects vibration shocks and similar signs of movement of the 
computer, and automatically moves the Hard Disk Drive head to a safe 
position to reduce the risk of damage that could be caused by head-to-disk 
contact. 
When vibration is detected, a message will be displayed on the screen, and 
the icon in the taskbar notification area will change to the protection state. 
This message is displayed until the OK button is pressed or 30 seconds 
pass. When vibration subsides, the icon returns to the normal state.
Taskbar Icon
TOSHIBA HDD Protection Properties
You can change the TOSHIBA HDD Protection settings by using the 
TOSHIBA HDD Protection Properties window. To open the window, click 
Start -> All Programs -> TOSHIBA -> Utilities -> HDD Protection 
Setting. The window can also be started from the icon on the Taskbar or 
from the Control Panel.
HDD Protection
You can choose whether to enable or disable TOSHIBA HDD Protection.
Detection Level
This function can be set to four levels. The sensitivity levels in which 
vibrations, impacts and their similar signs are detected can be set to OFF, 
1, 2 and 3 in ascending order. Level 3 is recommended for better protection 
of the computer. However, when the computer is used in a mobile 
environment or in other unstable conditions, setting the detection level to 3 
could result in frequent execution of TOSHIBA HDD Protection, which will 
slow Hard Disk Drive reading and writing. Set a lower detection level when 
the speed of Hard Disk Drive reading and writing is a priority.
This function does not guarantee that the hard disk drive will not be 
damaged.
State Icon Description
Normal TOSHIBA HDD Protection is enabled.
Protection TOSHIBA HDD Protection is active. The 
hard disk drive head is in a safe position.
OFF TOSHIBA HDD Protection is disabled.