User’s Manual 3-30
Hardware, Utilities and Options
3. Close the lid and slide the lock to the lock position.
Figure 3-21 Closing the lid
For details on inserting the Ultra Slim Bay HDD Adaptor in the computer’s
Ultra Slim Bay slot, refer to Chapter 4, Operating Basics.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port.
Figure 3-22 Connecting the monitor cable to the external monitor port
3. Turn the external monitor's power on.
4. Turn the computer's power on.
Lid
External monitor port
Monitor cable
To Next Page
Loading...
