User’s Manual 6-3
Power and Power-Up Modes
Table 6-1 Power conditions continued
*
1
When the Slice Expansion Battery is not charging.
*
2
When the main battery is not charging.
*
3
For the computer to shut down in Hibernation Mode, the Hibernation
feature must be enabled in Power Options. If a main battery and a Slice
Expansion Battery are installed, the computer does not shut down until
the charge in both batteries is exhausted.
*
4
When no Slice Expansion Battery is installed.
*
5
When no main battery is installed.
Power on
Power off
(no operation)
AC
adaptor
not
connected
2nd battery
charge is above
low battery
trigger point
• Operates
• LED: 2nd battery off
DC IN off
2nd battery
charge is below
low battery
trigger point
• Operates
• LED: 2nd battery
flashes orange
DC IN off
2nd battery
charge is
exhausted
Computer shuts down *
3
No 2nd battery
is installed
• No operation *
5
• LED: 2nd battery off
DC IN off
When batteries are charged, the main battery is charged first. When it is
fully charged, the Slice Expansion Battery is charged.
To Next Page
Loading...
