Toshiba TECRA S1 - Page 18

3-10 User’s Manual
Replacing the memory module
TECRA M2
■ Main memory module
1. Press the latches to the outside to release the module. A spring will
push one end of the module up.
2. Hold the edges of the module and pull it out, then replace the insulator.
Removing the memory module
■ Secondary memory module
1. Press the latches to the outside to release the module. A spring will
push one end of the module up.
2. Hold the edges of the module and pull it out, then replace the insulator.
Removing the memory module
■ If you use the computer for a long time, the memory modules and the
circuits close to the memory modules will become hot. Be sure to let
them cool to room temperature before you replace the memory
modules.
■ Do not touch the connectors on the memory module or on the
computer. Contamination on the connectors may cause memory
failures.
Latches
Slot A
When the memory module pops up, you can remove it from the slot.
LatchesSlot B
All manuals and user guides at all-guides.com