4 Replacement Procedures 4.35 Hinge
4.35 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-67 and 4-68.
1. Remove the following screw securing the brake hinge L.
• M2.5×6C Tapping screw ×1
2. Release two hooks and remove the brake hinge L through the hole.
Brake hinge L
M2.5x6C Tapping
Hook
Figure 4-67 Removing the hinge (1)
4-108 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
To Next Page
Loading...
