Toshiba TECRA S10 - Page 355

4.36 Fluorescent Lamp 4 Replacement Procedures
4.36.3 Replacing the 15.4-inch WSXGA+ Samsung Fluorescent Lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel and backlight unit.
To replace the 15.4-inch WSXGA+ Samsung fluorescent lamp, follow the steps below and
refer to figures 4-81 to 4-84.
Removing the fluorescent lamp
1. Remove the PCB cover.
CAUTION: Handle with care not to damage COF of S/D and G/D ICs.
PCB cover
Gate cover
Figure 4-81 Replacing 15.4-inch Samsung fluorescent lamp (WSXGA+) (1)
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-123