E6582185
8
Note 1 To make it easier to grasp the dimensions of each inverter, dimensions common to all inverters in these
figures are shown with numeric values but not with symbols.
Here are the meanings of the symbols used.
W: Width, H: Height, D: Depth
W1: Mounting dimension (horizontal)
H1: Mounting dimension (vertical)
H2: Height of EMC plate mounting area
D2: Depth of setting dial
A1: Mounting dimension (horizontal) from left side
A2: Mounting dimension (horizontal) from right side
Note 2. Here are the available EMC plates.
Fig.B1 : EMP008Z
Fig.C1 : EMP009Z
Note 3. The models shown in Fig. B1 are fixed at two points: in the upper left and lower right corners.
Note 4. The cooling fan of shown in Fig. B1 model are on the upper side of the inverter.
Fig. C1
VF-S15
EMC plate
(Option)
2-Φ5
2-R2.5
D
44
58
126 (Mounting dimension)
A2 A1
5
14
7.5
157 (Mounting dimension)
170
W
To Next Page
Loading...
