Toshiba TransMemory - Chapter 2: Required System Configuration

4
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB TNU FLASH DRIVE
Chapter 2: Required System Configuration
The following are required to properly operate this product:
■ Required hardware
• CPU: Intel Pentium II 266MHz or higher
• Available hard disk space of at least 800 KB
• USB Specification-compliant USB port (Operation on self-built or modified personal
computers cannot be guaranteed.)
■ Required operating systems
• Microsoft® Windows® XP Professional Service Pack 2 or greater
• Microsoft® Windows® XP Home Edition Service Pack 2 or greater
• Microsoft® Windows Vista® Ultimate
• Microsoft® Windows Vista® Enterprise
• Microsoft® Windows Vista® Business
• Microsoft® Windows Vista® Home Premium
• Microsoft® Windows Vista® Home Basic
• Microsoft® Windows® 7 Ultimate
• Microsoft® Windows® 7 Enterprise
• Microsoft® Windows® 7 Professional
• Microsoft® Windows® 7 Home Premium
• Microsoft® Windows® 7 Home Basic
• Microsoft® Windows® 7 Starter
For Microsoft Windows XP be sure to first log in as a user belonging to the Administrator’s
group. If attempting to log in as a User, an error may result.
Note: The TransMemory
TM
Secure Software does not work with any operating system other than
Microsoft

Windows

systems listed above.