Toshiba TransMemory - Chapter 4: How to Use the Security Software; Connect TransMemory USB Flash Drive; Setting up Security Software Adaptability Check

7
v.1.0
Security Software Installation Manual
TRANSMEMORY™ USB TNU FLASH DRIVE
Chapter 4: How to Use the Security Software
This chapter describes how to use the TransMemory
TM
Secure Software. Be sure to follow the
instructions for correct installation.
Important Note: Before following the instructions below, please back up any data stored in the
TransMemory
TM
Flash Drive that you wish to save. All data may be lost when formatting
TransMemory
TM
for the Privacy Zone. Toshiba assumes no liability for destruction or loss of data
stored on TransMemory
TM
for any reason.
■ 1. Connect the TransMemory USB TNU Flash Drive
Please connect the TransMemory
TM
Flash Drive to your computer before executing the
TransMemory
TM
Secure Software.
■ 1.1 Setting up the Security Software – Adaptability Check
1) Double click on the “TransMemory_Secure305.exe” security software icon to start up the
security software.
2) Some types of TransMemory
TM
USB Flash Drives will show the dialogue boxes below.
Click “Check” when below dialogue box appears.