What does P31 error indicate on Toshiba Industrial Equipment?
If your Toshiba Industrial Equipment displays error P31, this means that another indoor unit in the group is raising an alarm. To troubleshoot, check all indoor units in the group.
What does error code F18 mean on my Toshiba VN-M1500HE and how can I resolve it?
The error code F18 on your Toshiba Air Conditioner signals an open-circuit or short-circuit detected in the heat exchanger sensor (TRA). You should check the Return Air sensor (TRA) and the indoor P.C. board.
What does error code E02 mean on my Toshiba VN-M1500HE?
Error code E02 on your Toshiba Air Conditioner indicates a remote controller transmission error, meaning no signal can be sent to the indoor unit.
What does error code E03 mean on my Toshiba VN-M1500HE?
Error code E03 on your Toshiba Air Conditioner signifies an indoor unit-remote controller regular communication error. This means no data is being received from the remote controller or network adapter.
Why does my Toshiba VN-M1500HE show error code L03?
The error code L03 on your Toshiba Air Conditioner indicates an indoor address setting error. Specifically, there are two or more header units in the group.
How to resolve E08 error on Toshiba Industrial Equipment?
If your Toshiba Industrial Equipment displays error E08, it indicates an indoor address setting error where the same address as the self-address was detected. To fix this, check the indoor address settings.
What to do if Toshiba Industrial Equipment shows E03 error?
If your Toshiba Industrial Equipment displays error code E03, it means there is an indoor unit-remote controller regular communication error. Check the remote controller, network adapter, and indoor P.C. board.
How to fix L03 error on Toshiba Industrial Equipment?
If your Toshiba Industrial Equipment displays error L03, it is due to an indoor address setting error, specifically having two or more header units in the group. To resolve this, check the indoor address settings.
What does error code L20 mean on my Toshiba VN-M1500HE?
Error code L20 on your Toshiba Air Conditioner indicates a duplication of address in central control communication. Check the address setting, central control remote controller, and network adapter.
Why does my Toshiba Air Conditioner display error code L08?
The error code L08 on your Toshiba Air Conditioner is due to an indoor address setting error, specifically because the indoor address group has not been set.
General| Brand | Toshiba |
|---|---|
| Model | VN-M1500HE |
| Category | Air Conditioner |
| Language | English |
To Next Page