Toshiba W-522 - Clock Setting Procedure

ExampleTosettheclockto230pm on
August25(summertime)2002
][ Press PROG.
The MENU screen appears on the TV
2 Select PRESET" using FFor REVI_
and press ENTER
CLOCK S'E[
£H MEMORV
mno_
3 Press ENTERto select "CLOCK SET"
CLOCK SD"
ILSUMMER TIME
n TIME ZOnE CH
EnD_
TO |TART OETTInG
4 Select 'AUTO" or' MANU" using PLAY or
STOP
AUTO The VCR automahcaUy sets or
adjusts the clock
If you select AUTO' mode proceed to step 8
MANU You can set the clock manuaUy
If you select MANU" mode, proceed to next
step
Vary the digits to set the hour
PLAY To increase
STOP To decrease
6 Move to the next using FF
(Tomove back press REW)
7 Repeat step 5 and 6 to set the minutes,
month, day, and the year (by the last
two digits)
Proceed to step 10 to start the clock
8 Press ENTERto start the AUTO" clock
set feature
After the VCR Esturned off, _tautomatically
updates the clock using the data broadcast
by the local TV stations
"The clock ts I _a_ _ i
revEsed by
I
signal at 8 00AMbr°adcasttng I/CLOCKSET l
n SUMMER TIME
TIME ZOnE CO
ii dlnD Juno _ 2
every morning [nD.(_
8CAJlsnlnl3 nOW
9 Select the options using FFor REW
Change the data using PLAYor STOP
1) Set 'SUMMERTIME
(Dayhght-Sawng Time)"
DST start Dayhght-sawng hme begins on
the first Sunday m Apnl Because the
clock automatically changes from 2 00 AM
to 3 00 AM (forward one hour)
DST end Dayhght-sawng time ends on
the last Sunday in October The VCR
clock automatically changes from 2 00 AM
to 1 00 AM (back one hour)
remember that any part of a scheduled
Timer Recording that falls between [hese
two times wdl not be recorded
AUTO the VCR is using the clock data
Broadcast by the local TV statEons
IN You want to use the DST function, and
you are leawng in the area that apply
Dayhght-sawng hme
OUT You are not leawng in the area that
apply Dayhght-sawng tEmeand you do no[
want to use DST function
2) Set' TIME ZONE"
If you select AUTO" for your time zone
the VCR sets the clock using the first
CoordEnated UnEversal Time _nformatEon _t
finds If the hme is not correct, select
another [Emezone or use the MANU"
option
3) Set' CLOCK DATA CH"
If you don't know the clock data channel,
select AUTO" The VCR wdl scan
automatically to tune the channel carrying
the clock data
If AUTO CLOCK SET ts unsuccessful set the
tEmeand date through the MANU ' clock
set menu selection
|0 Press PROG.
Now the clock starts
16