PREPARATION
Conlzection$
Befot'e you use this VCR, it _s necessary to connect it to your TV Several ways of connecting are
avadabledepending on your use of TV or cable box Select one whch is apphcable to your equipment
][ Disconnect the antenna cable from your TV and connect it to the RF IN terminal on the
VCR
2 Connect the RF OUT terminal to the TV_
VHF/UHF _"_'_=
comb,nat,on an,enna _ VnHyFan,enna _ oLHFantenna_*-i_
i i
Model W528_W_522" IFInal ...................................1 .......[.................................
ModelW-422 J "t-- [_L..__ __
Setttng the VCR Output Channel Antenna sphtter
When the VCR is connected Jnthis way the VCR sends the output (not supphed_
signals to channel 3 or 4 on your TV Set Ihe output channel
selector (CH selector) of the VCR to 3 or 4 whichever _svacant
in your" area
W-'_[III] [sT&TJI D]:[e] [_
The AUDIO/VIDEO jacks are also available to connect your TV
MGdel W-52£
W-522 When connected your fV using the
_T _ Mo_el W422 AUDIO/VIDEO OUT jacks
-- To watch vEdeo p_ctures set the v_deo tnput mode
o_ = on your TV For the v_deo _nput mode refer to the
LL_ LL_ _nual of your TV
L,r,E ,,T .C,_ -,,L, ,r, D
L,rlE Jr-,,= • _L, ,rl
Choose one of the below according to your usage of the cable box
This set-up will enable you to:
MGdel W-52£
W522 Mode[W 422 -- record an unscrambled channel
_ - watch an unscrambled channel whEle recording _t
- record an unscrambled channel whde watching
__ __ another (only when you connect a cable compahble TV}
Y
,..... gca_LD y_ _You will need to:
_nc_m,n__b_e_ • select TV channel 3 or 4 to receive v{de0 signals
• 1o record a channel whde watching another press
TV/VCR on the remote control to turn off the VCR'
indicator m the VCR d_splay and select a desFed
channel on the TV #only when you connect a cable-
compahble TV)
12
To Next Page
Loading...
