Toshiba W-528 - Preparation: Channel Storage

PREPARATION
Storing Channels on the VCR
This section is required if you receFve only normal TV or unscrambled cable channels
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory Once the stonng {s finished, you can select a des{red
channel using CH/TRK.
Preparation
• Turn on the TV, and select the v_deo channel {3 or 4) or the v_deo input mode if you made the Audio/Video
connection {page 12)
• Press I SELECTso that the channel number wt}l appear if L1 ! L2 ( For W-528/W-522 only ) or
'L ( For W-422 only) is displayed in the VCR display
;0
ill
1;J
..4
Z
'I1"_,'-_2_ '
-- _
"I_IHIIA
Number
buttons
IO0
REW
FF
PLAE STOP
ENTER
1,6
I SELECT
][ Press PROG to display the MENU screen
2 Select' PRESET" using FFor REW,
and press ENTER
1
I
£1ACK SET 1
ca MEMORY
3 Select'CH MEMORY'usng PLAY
or STOP, and press ENTER
Ig ICR1U
lorr on
I-- Ca
EnP.(_
4
5
Set TV/CATV to 'TV" or CATV" ustng FFor REW
TM To store channels received via the antenna
CATM. To store channels receEved wa the iricornlng cable
Select'AUTO SCAN" usnng PLAYor I'_ _11_ _11_4_1
STOP, and press FF to set to "ON" EnD
The VCR starts scanning and the
channels are stored m the VCR in .m sc.n z CH o.
ascending order When the scanning is
finished, the screen automahcaUy
returns
6 Press PROG. twice to exit
17