Toshiba W-603 - Preparation; How to Use the Remote Control; Setting up the Remote Control

Reference Information
2-4 Toshiba
15
PREPARATION
8
Press ENTER to start the “AUTO” clock
set feature.
After the VCR is turned off, it automatically updates the clock using the data broadcast by the local TV stations.
9
Select the options using CURSOR ( ) or ( ). Change the data using
CURSOR (▲) or (▼).
1) Set “SUMMER TIME
(Daylight-Saving Time)”.
DST start: Daylight-saving time begins on the first Sunday in April. Because the clock automatically changes from 2:00 AM to 3:00 AM (forward one hour). DST end: Daylight-saving time ends on the last Sunday in October. The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour).
remember that any part of a scheduled Timer Recording that falls between these two times will not be recorded. AUTO: the VCR is using the clock data
Broadcast by the local TV stations.
IN: You want to use the DST function, and you are leaving in the area that apply Daylight-saving time. OUT: You are not leaving in the area that apply Daylight-saving time and you do not want to use DST function.
2) Set “TIME ZONE”.
If you select “AUTO” for your time zone, the VCR sets the clock using the first Coordinated Universal Time information it finds. If the time is not correct, select another time zone or use the “MANU”
option.
3) Set “CLOCK DATA CH”.
If you don't know the clock data channel, select “AUTO”. The VCR will scan automatically to tune the channel carrying the clock data.
If AUTO CLOCK SET is unsuccessful, set the time and date through the “MANU” clock
set menu selection.
10
Press PROG.. Now the clock starts.
Setting the Clock
Example: To set the clock to 2:30 p.m. on August 25 (summer time) 2000. 1
Press PROG.. The MENU screen appears on the TV.
2
Select “PRESET” using CURSOR ( ) or
( ), and press ENTER.
3
Press ENTER to select “CLOCK SET”.
4
Select “AUTO” or “MANU” using
CURSOR (▲) or (▼).
AUTO: The VCR automatically sets or adjusts the clock. If you select “AUTO” mode, proceed to step 8. MANU: You can set the clock manually. If you select “MANU” mode, proceed to next
step.
5
Vary the digits to set the hour. CURSOR ▲: To increase. CURSOR ▼ : To decrease.
6
Move to the next using CURSOR ( ) (To move back, press CURSOR ( ).)
7
Repeat step 5 and 6 to set the minutes,
month, day, and the year (by the last two digits).
Proceed to step 10 to start the clock.
E
n
D : PROG
SET UP
PRESET
PROGRAM
ENTER
CLOCK SET
CH MEMORY
▼
▼
▼
▼
▼
▼
E
n
D : PROG
SET UP
PRESET
PROGRAM
ENTER
CLOCK SET
SUMMER TIME
TIME ZOnE CH
AUTO
AUTO
AUTO
PRESS E
n
TER
TO START SETTI
n
G
E
n
D : PROG
SET UP
PRESET
PROGRAM
ENTER
CLOCK SET
SUMMER TIME
TIME ZO
n
E CH
AUTO
AUTO
AUTO
AUTO
2
SCA
nn
I
n
G
nO
W
* The clock is revised by broadcasting signal at 8:00 A.M every morning.
14
E
n
D : PROG
SET UP
PRESET
PROGRAM
TAPE LE
n
GTH
120 160 180
SAP SET
on off
COU
n
TER MEM
on off
LA
n
GUAGE E
n
G FRA ESP
Optional settings on the SET UP screen Other optional settings can be made. Press ENTER while “SET UP” is selected on the MENU screen. The screen turns to the SET UP screen. To exit, press PROG. twice.
Setting the Language
1
Press POWER to turn on the VCR.
2
Press PROG.. The following screen appears on the TV.
Page 22
PREPARATION
Initial Settings Using On-screen Display
The language selection and clock setting must be set first when VCR is first plugged in or after it encounters a power failure.
Preparation • Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press VCR to set the remote control operating the VCR.
Page 28
3
Select the language using CURSOR (▲) or (▼) , and press PROG.. The screen turns to the MENU screen.
Page 23
4
Press PROG. to return to the normal TV screen.
MEnU
SET UP
PRESET
E
n
D : PROG
ENTER
PROGRAM
E
n
D : PROG
SET UP
PRESET
PROGRAM
English Français Español
POWER
VCR
PROG
CURSOR
To change the language, move down here and set to the desired one.