Toshiba W-603 - Page 36

4-14
Toshiba
Disassembly and Reassembly
4-3-17 Lever Up Down Ass’y, Gear Center Ass’y
Removal
1) Remove the 2 hooks in the direction of arrow as
shown Fig. 4-24 and lift the Lever Up Down Ass’y
Œ.
2) Lift the Gear Center Ass’y ´.
´ GEAR CENTER ASS'Y
ΠLEVER UP DOWN ASS'Y
4-3-18 Assembly of Lever Up Down Ass’y,
Gear Center Ass’y
1) Insert the Lever Up Down Ass’y Œ in the 2 rectan-
gular holes on Main Base.
2) Lift the Lever Up Down Ass’y Œ about 35 degree.
(Refer to Fig. 4-25)
3) Insert Ring ¨ of the Gear Center Ass’y ´ in the
Guide ˆ of the Lever Up Down Ass’y Œ.
4) Insert the Gear Center Ass’y ´ in the post Ø on
Main Base.
5) Push down the Lever Up Down Ass’y Œ for lock-
ing of the Hook ∏.
Note :
1) Take care not to separate and loose the Spring Up
Down.
2) When assembling the Gear Center Ass’y, don’t
push down too much.
MAIN BASE
ΠLEVER UP DOWN ASS'Y
ˆ GUDIE
´ GEAR CENTER ASS'Y
¨ RING
ˇ GEAR
Ø POST
∏ HOOK
35˚
Fig. 4-24 Lever Up Down Ass’y, Gear Center Ass’y Removal
Fig. 4-25 Assembly of Lever Up Down Ass’y, Gear Center Ass’y