34
Channels Reverse
During you made [Wiring Test], [CH Reverse] is used
to correct the running direction of motor (or rudder)
after you found them did not run the correct direction
as expected.
For example, if your boat are with 2 engines, and you
found the motor was running the counter direction
when you push [Go Forwarder] in the [Wiring Test] ,
then please enter into [CH Reverse] and select CH2
Reverse.
Steering Sens.
Set the sensitivity of boat steering
Channel 1 Speed
Limite the max speed of boat motor (Channel 1)
Channel 2 Speed
Limite the max speed of boat motor (Channel 2)
To Next Page
Loading...