11
Introduction for buttons on remote controller
Function introduction for combination buttons
Press “+” and “-” buttons simultaneously can turn on or turn off child lock function.
When child lock function is started up, LOCK indicator on remote controller is ON.
If you operate the remote controller, remote controller won’t send signal.
Note:
Ɣ5DQJHRIWLPHVHWWLQJLVaK
Ɣ 7KHLQWHUYDOEHWZHHQWZRPRWLRQVFDQWH[FHHGVRWKHUZLVHWKHUHPRWHFRQ
troller will exit setting status.
Child lock function
Temperature display switchover function
Under OFF status, press “-” button and “MODE” button simultaneously can switch
between °C and °F.
To Next Page
Loading...
Need help?
General
