05
Operation
Installing the Filter
WARNING
For safety concern, do not open the grille cover and replace filter when the unit
powers on. Make sure the unit disconnects power before installing/replacing the
filter.
1. Push the left side “ ” marked
place, and then press the other
side to open the front grille cover.
2. Take out the new filter and
remove from the plastic bag.
3. Install the new filter and then place the
front grille cover back in place.
* Make sure the filter placed in the right
position. Pull-tag on the filter should
be outward and the white side with
“True-HEPA” should be inward.
To Next Page
Loading...
Need help?
General