63
Technical Information
Service Manual
remote controller will change quickly. On releasing button after setting is finished, temperature indica- tor on indoor unit will change
accordingly. (Temperature can’t be adjusted under auto mode)
● Press "▲" or "
▲
" button once increase or decrease set temperature 1
(1°F)
. Holding "▲" or "
▲
" button, 2s later, set temperature on
● When setting TIMER ON, TIMER OFF or CLOCK, press "▲" or "▲" button to adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF
7.
WIFI button9.
SLEEP button
LIGHT button10.
buttons)
CLOCK button
12.
11.
TIMER ON / TIMER OFF button
Under COOL, HEAT or DRY mode, press this button to start up sleep function. "
" icon is displayed on remote controller.
again to cancel sleep function and " " icon will disappear.
" icon on remote controller disappears. Press this button again to turn o
Press this button to turn off display light on indoor unit. "
display light. " " icon is displayed.
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is turned on, the " WiFi " icon will be displayed on remote
controller; Under status of remote controller off, press "MODE" and " WiFi " buttons simultaneously for 1s,WiFi modulewill restore to
default setting.
" icon stops blinking.
Note:
Clock time adopts 24-hour mode.●
●
OFF is the same.
The interval between two operation cant exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER
●
Press this button to set clock time. " " icon on remote controller will blink. Press "▲" or "
▲
" button within 5s to set clock time. Each
pressing of "▲" or "
▲
" button, clock time will increase or decrease 1 minute. If hold "▲" or "
▲
" button, 2s later, time will change quickly.
TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, "
" icon disappears and the word "ON" on remote controller
blinks. Press "▲" or "
▲
"button to adjust TIMER ON setting. After each pressing "▲" or "
▲
" button, TIMER ON setting will increase or
decrease 1min. Hold "▲" or "
▲
" button, 2s later, the time will change quickly until reaching your required time. Press "TIMER ON" to
started up, press "TIMER ON" button to cancel it.
● TIMER OFF button
" icon resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
8. TEMP button
"TIMER OFF" button can set the time for timer off. After pressing this button,"
" icon disappears and the word "OFF" on remote
controller blinks. Press "▲" or "
▲
" button to adjust TIMER OFF setting. After each pressing "▲" or "
▲
" button,
TIMER OFF setting will increase or decrease 1min. Hold "▲" or "
▲
" button, 2s later, the time will change quickly until reaching your
required time. Press "TIMER OFF" word "OFF" will stop blinking. " " icon resumes displaying. Cancel TIMER OFF. Under the condition
that TIMER OFF is started up, press "TIMER OFF" button to cancel it.
●
●
When selecting " " or no display with remote controller, temperature indicator on indoor unit displays set temperature.
●When selecting "
When selecting " " with remote controller, temperature indicator on indoor unit displays indoor ambient temperature.
Note:
●
" with remote controller, temperature indicator on indoor unit displays outdoor ambient temperature.
Outdoor temperature display is not available for some models. At that time, indoor
unit receives "
temperature.
●
"signal, while it displays indoor set
●
Its defaulted to display set temperature when turning on the unit.There is no display in the remote controller.
●
Only for the models whose indoor unit has dual-8 display.
By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on indoor
units
display. The setting on remote controlleris selected circularly as below:
When selecting displaying of indoor or outdoor ambient temperature, indoor temperature indicator displays corresponding tempe
no display
To Next Page
Loading...
Need help?
General
