-2-
Indicates situations where slight bodily injury or ma-
chine damage can occur.
Indicates situations where severe bodily injury, death
or major machine damage can occur.
This guide includes information that must be followed to ensure the correct and safe use
of this product. Be sure to read both this guide and any related manuals to thoroughly
understand the correct operation and functions of both the Bus Conversion Unit and the
10.5" and 12.1" QP-Ethernet Series units.
Usage of Safety Icons
Throughout this manual the following icons are shown near procedures requiring spe-
cial attention to safety. The information given below these icons contains essential safety
information.
The following examples explain the meaning of each safety icon:
Safety Precautions
CAUTION
WARNING
To prevent this unit from malfunctioning :
• Be sure the Unit is operated in an environment that is within the unit's desig-
nated temperature range.
• Do not operate or store this unit in an environment where it will be exposed to
high temperatures.
• Do not operate or store this unit in an environment where it will be exposed to
direct sunlight or excessive amounts of dust.
• Since this unit is a precision instrument, do not install it where strong impacts or
vibration will occur.
• Do not operate or store this unit in an environment where it may be exposed to
chemical vapors or fumes.
• When attaching this unit to a 10.5" or 12.1" QP-Ethernet Series unit, make
sure that the QP-Ethernet's power cord is not connected to the main power
(constant), to prevent an electric shock.
• Do not modify this Unit in any way, since an electric shock or fire may occur.
• Do not use this Unit in areas where flammable gas is present, since an explo-
sion may occur.
• Do not allow water, liquid or metallic objects to enter into the Unit, since they can
cause either a malfunction or an electric shock.
WARNINGS
To Next Page
Loading...