Total Control QPI-PSL-201 - CE Marking Notes

-3-
The QPI-PSL-201 (Model #2980020-02) is a UL/c-UL listed product. (UL file No.E182139)
This unit conforms as a product to the following standards:
zz
zz
z
UL508
Industrial Control Equipment
zz
zz
z
UL1604
Electrical Equipment for use in Class I and II, Division 2, and Class III Hazardous
(Classified) Locations.
zz
zz
z CAN/CSA-C22.2, Nos. 142, and 213-M1987
Standard for Safety of Information Technology Equipment, including Electrical Busi-
ness Equipment
QPI-PSL-201 (UL Registration Model #2980020-02)
UL1604 Conditions of Acceptability and Handling Cautions:
1. Power, input and output (I/O) wiring must be in accordance with Class I, Division
2 wiring methods - Article 501- 4(b) of the National Electrical Code, NFPA 70
within the United States, and in accordance with Section 18-152 of the Canadian
Electrical Code for units installed within Canada.
2. Suitable for use in Class I, Division 2, Groups A, B, C and D, Hazardous Loca-
tions.
3. WARNING: Explosion hazard - substitution of components may impair suitability
for Class I, Division 2.
4. WARNING: Explosion hazard - when in hazardous locations, turn power OFF
before replacing or wiring modules.
5. WARNING: Explosion hazard - do not disconnect equipment unless power has
been switched OFF, or the area is known to be non-hazardous.
The QPI-PSL-201 is a CE marked
*1
product that conforms to EMC directives
EN55011 Class A and EN61000-6-2.
*1 For detailed CE marking information, please contact your local distributor.
UL/c-UL (CSA) Application Notes
CE Marking Notes