Totally Wicked Arc Mini 2 - Page 10

18 19
CHECKING BATTERY LEVEL AND
ATOMIZER RESISTANCE
The current battery level and atomizer
resistance can be checked. Press the power
button 3 times quickly to access the menu.
Use the adjustment button to highlight either
“%” to show battery charge remaining, or the
“Ω” symbol to show atomizer resistance.
LOCKING THE WATTAGE
The wattage of the arc Mini 2 can be locked to
prevent accidental adjustments. To lock the
wattage press both the power up and power
down buttons simultaneously for 3 seconds,
the screen will display “L”. It will display “L” if
any attempt is made to adjust the wattage.
To unlock, follow the same process and the
screen will display “UL”
CHARGING THE BATTERY
To charge the battery, connect the charge
lead to the USB port. The screen will display
the battery charge in %, and the “%” symbol
will continue to ash slowly after this. The “%”
display will continue to ash until the battery is
fully charged.
BATTERY LEVEL INDICATION
The arc Mini 2 device will display a current
battery percentage. When you release the
power button, the screen will display the
current battery percentage for 5 seconds,
after which it will turn o.
ADJUSTMENT OF AIRFLOW
The airow on the arc Mini 2 can be adjusted
to meet your preferences by rotating the
airow control ring located on the bottom of
the tank.
ATOMIZER PROTECTION
If the power button is held down for 10
seconds or longer, the device will stop
producing vapour. Press the power button
again to resume normal vaping.
USING YOUR ARC MINI 2
TW-Arc-Mini-2-Manual-UK.indd 18-19TW-Arc-Mini-2-Manual-UK.indd 18-19 20/12/2023 13:2520/12/2023 13:25