14 15
CHARGE THE BATTERY
PRIMING AND INSTALLING THE
ATOMIZER HEAD
Note: It is important to “prime” a new
atomizer head before rst use. Failure to
do so can cause irreversible damage to the
atomizer head.
To install an atomizer head, remove an
atomizer head from its packaging, “prime”
the atomizer head by dripping a few drops
of e-liquid on the visible cotton at the sides
of the atomizer head. Unscrew the base of
the tank by turning anti-clockwise and insert
the atomizer head into the tank, Screw the
base of the tank back on by turning clockwise
and attach to the arc Mini 2 device by turning
clockwise.
ATOMIZER HEAD LIFESPAN
Atomizer heads do not last forever and
need to be replaced periodically. Lifespan is
generally from a few days to several weeks,
depending on power used, vaping style,
avour and type of e-liquid. A slight burnt
taste, general loss of vapour production,
or a reduction in avour intensity can all be
indicators that the atomizer head requires
replacement.
USING YOUR ARC MINI 2
TW-Arc-Mini-2-Manual-UK.indd 14-15TW-Arc-Mini-2-Manual-UK.indd 14-15 20/12/2023 13:2520/12/2023 13:25
To Next Page
Loading...
