Toto CST412MF - English; Table of Contents; Thanks for Choosing TOTO; Included Parts

2
ENGLISH
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more comfortable lifestyles. We design every product
with the balance of form and function as a guiding principle. Congratulations on your choice.
INCLUDED PARTS
Check to make sure you have all these parts from the package:
Top Mount Bolt Set
(for seat)
Modular Rough-In
(for 414 model only)
Lid, Tank
Mounting Block
(2 pieces)
Screw with Washer
(2 pieces)
Green Anchor
(2 pieces)
(for 414 only)
Socket
(for 412, 416 &
464 models)
Screw & Washer
for Mounting
Block Installation
(4 pieces each)
Side Screw and
Side Screw Cap for
Mounting Block
(2 pieces each)
White Anchor
(4 pieces)
Thanks for Choosing TOTO! ..................................................................................................................................................................2
Included Parts ..........................................................................................................................................................................................2
Common Tools Needed ..........................................................................................................................................................................2
Before Installation ................................................................................................................................................................................ 2-3
Installation Procedure .......................................................................................................................................................................... 3-4
Fill Valve Replacement Instructions ........................................................................................................................................................5
Fill Valve/Flush Valve Servicing Instructions...........................................................................................................................................5
Warranty....................................................................................................................................................................................................6
(Not pictured but also included: Socket Template, Tank-to-Bowl Gasket)
COMMON TOOLS NEEDED
• 12” pipe wrench
• 10” adjustable wrench
• Carpenter’s Level
• Tape Measure
MATERIALS REQUIRED:
(Not Included)
• Flexible Supply Tube / Connector
• Supply Stop Valve
• Screwdriver
• Putty Knife
• Drill
• Pliers
• Mounting (T) Bolts & Nuts (2pc)
• Wax Ring / Seal
• For wood oor installation:
- 3/32” drill bit for Socket or Modular Rough-In
- 11/64” drill bit for Mounting Block
• For concrete/tile installation:
- 9/32” drill bit for Socket or Modular Rough-In
- 11/32” drill bit for Mounting Block
BEFORE INSTALLATION
 Read these instructions thoroughly before beginning work.
 Please leave instructions for customers. These instructions contain maintenance and warranty information.
 If necessary, remove the existing toilet and if new construction, purge the supply line.
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity ushing systems, they are not specied for back-to-back
installations. The only means of installing these toilets in a back-to-back situation is when the toilet drain connections incorporate a WYE tting.
Please contact your builder or contractor prior to this installation.
Double Combination WYE / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
Tank Mounting
Hardware (2 pieces)