EasyManua.ls Logo

Toto CST412MF User Manual

Toto CST412MF
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends online warranty registration. Please visit our web site http://www.totousa.com.
If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road,
Morrow, GA 30260 (888) 295-8134 or (678) 466-1300 when calling from outside of U.S.A.
Installation and Owner’s Manual
Manual de Instrucciones y del Propietario
Manuel d’Installation et d’Utilisation
Dual Flush Toilets
Excusado de doble cisterna
Toilettes à double chasse d’eau
CST412MF
CST412MF.10
CST414M
CST416M
CST464MF

Other manuals for Toto CST412MF

Question and Answer IconNeed help?

Do you have a question about the Toto CST412MF and is the answer not in the manual?

Toto CST412MF Specifications

General IconGeneral
Toilet TypeOne-Piece
Flush SystemTornado Flush
Water Consumption1.28 GPF
Bowl Height16.5 inches
Bowl ShapeElongated
Rough-In12 inches
MaterialVitreous China
Trip Lever LocationLeft
Seat IncludedYes
FinishCotton White

Summary

Installation Procedure

Dimensions Check

Verify toilet fit dimensions before installation, including wall to drain distance and water supply.

Floor Preparation and Drilling

Mark screw locations using template and drill holes for socket/rough-in and mounting blocks.

Mounting Bolts and Rough-In Installation

Install mounting bolts into flange and seat the socket/rough-in with wax seal.

Securing Rough-In and Mounting Blocks

Fasten rough-in with nuts and secure mounting blocks to the floor using screws.

Tank Hardware Installation

Install tank mounting hardware to the bowl as shown in diagram III.4.

Bowl Placement and Connection

Place toilet bowl over socket/rough-in and mounting blocks, connecting to the rough-in.

Side Screw Installation

Install side screws to mounting blocks and cover with provided screw-caps.

Water Supply Connection

Connect water supply hose to fill valve, hand-tighten then wrench 1/4 turn.

Tank-to-Bowl Gasket and Tank Mounting

Install tank-to-bowl gasket and mount tank onto bowl using provided hardware.

Flush Valve Assembly

Assemble flush valve by connecting parts, tightening nuts evenly to seat tank.

Push Button Rod Adjustment

Adjust push button rods by turning lock nuts to ensure proper flush button height.

Final Water Supply Connection

Connect water supply tube to angle stop, open valve, and test for leaks.

Toilet Seat Installation

Install toilet seat using top-mount bolt set, inserting rubber bushing-nut.

Fill Valve Instructions

Fill Valve Replacement Installation

Steps for removing the old fill valve and installing a new one, including connecting water supply.

Fill Valve Water Level Adjustment

Procedure to adjust the water level in the tank by unlocking and repositioning the valve.

Fill Valve / Flush Valve Servicing Instructions

Fill Valve Servicing

Instructions for servicing the fill valve, including float removal and center tube cleaning.

Flush Valve Servicing

Steps for servicing the flush valve, including gasket cleaning and reassembly.

Warranty Information

Limited Warranty Coverage

Details TOTO's one-year limited warranty for vitreous china products from date of purchase.

Warranty Exclusions

Lists conditions and damages not covered by the limited warranty, such as natural calamities and misuse.

Obtaining Warranty Service

Explains how to obtain warranty repair service, including required documentation and contact information.

Important Warnings

Warns against using in-tank bowl cleaners and clarifies TOTO's liability for related damage.

Related product manuals