To Next PageTo Next Page
Need help?Do you have a question about the Toto TMC95 V101 and is the answer not in the manual?
General| Brand | Toto |
|---|---|
| Model | TMC95 V101 |
| Category | Bathroom Fixtures |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual.
Warns against allowing children to use the product without supervision to prevent injury.
Strictly prohibits disassembling or modifying the product as described in the manual.
Warns users not to touch the hot parts of the product with bare hands to avoid burns.
Advises checking water temperature with hand before use to prevent scalding.
Instructs users to check the ON/OFF button function to avoid accidental hot water use.
Specifies a limit of 85°C for hot water to prevent damage and injury.
Prohibits using external parts or removing existing ones to maintain product integrity.
Guides on setting temperature handles correctly according to indications to prevent scalding.
Advises slow and gentle operation of the temperature handle to avoid sudden temperature changes.
Recommends semi-annual checks for leaks and loose pipes to prevent damage.
Stresses the importance of regular check valve replacement for safety and proper function.
Details safety steps for filter cleaning, including shutting off valves.
Explains the importance of water supply pressure for normal temperature adjustment.
Provides guidance on setting the temperature handle to '40' during freezing conditions.
Warns against striking the product violently to prevent damage and leaks.
Recommends using water under 45°C for showers for safety.
Warns against using the shower tower as a handrail or for hanging objects to prevent falls or damage.
Advises against use in freezing conditions due to potential damage and voided warranty.
Guides users to handle the shower head carefully to avoid damage and injury.
Notes that the shower head may not withstand frequent use in public or leisure settings.
Recommends gentle operation of ON/OFF buttons to prevent water hammer and leaks.
Advises shutting off stop or main valves when the product is left unused for extended periods.
Guides on verifying the water outflow temperature against factory settings.
Instructs setting the hot water device temperature 10°C higher than the desired outflow.
Guides setting the temperature handle mark to '40' on the scale for initial setup.
Directs setting the flow lever to its highest position during temperature checks.
Instructs activating the hand shower to check water flow.
Final step to check if outflow temperature is correct (approx. 40°C).
Details the process for calibrating the temperature handle for accurate temperature control.
Explains how to adjust the water flow rate using the stop valves.
Guides on turning the temperature handle to set the desired water temperature.
Explains how to increase or decrease water flow using the flow lever.
Details how to use the overhead, hand, and body showers with ON/OFF buttons.
Step-by-step guide for cleaning and maintaining the product's filter.
Provides instructions for cleaning the product's surfaces with cloths and tooth-brushes.
Details how to clean nozzles, especially for turbulent stream lines.
Lists materials to avoid using as they may damage the faucet surface.
Instructions for checking pipe circuits for leaks twice a year.
Guidance for checking the main body for looseness twice a year.
Recommends checking temperature handle operation monthly to prevent buildup.
Explains the importance and process of replacing the check valve.
Instructions for shutting off water flow in emergencies like pipe leakage.
Troubleshooting steps for when the shower water does not stop flowing.
Troubleshooting advice for issues related to weak water flow.
Guidance for addressing situations where the water temperature is too hot.
Troubleshooting steps for when the water temperature is too cold.
Steps to take when the water temperature cannot be adjusted correctly.
Lists common issues that are not considered product malfunctions.
Guidance on requesting replacement for worn or degraded parts.
Details the information required when requesting a repair service.
Information regarding the guarantee certificate and its importance.
Explains the guarantee period and conditions, including fees.
Information on the duration for which replaceable parts are supplied.
Fields for recording user, installation firm, and purchase details.
Important notes for users regarding the guarantee certificate and its use.
Lists cases where repair may be charged even within the guarantee period.
