Toto Soiree - User Manual

Soiree ™ and Guinevere ™ Grab Bars
Stable!
TOTO
Reinforcement
Notes
Important Safeguards
(For your safety, please follow the instructions below)
Warning
Do not disassemble!
The action must be performed
as described.
●
●The following symbols indicate safe and proper use of the product.
Failure to observe them may result in injury or property damage.
The symbols and their meanings are as follows:
Meaning
Sign
Read the “Important Safeguards” section thoroughly before installing the product.
The following table demonstrates the use of safety
symbols in this manual.
Ignoring this symbol may result in injury
or property damage.
Warning
Do not
disassemble
Mandatory
Do not try to disassemble or modify the grab bars by any means without
professional assistance. Do not disassemble or modify the items in any way not
described in this manual.
For best results, be sure to follow the installation instructions and use the product only as described
in the manual. Please describe how to properly use the products to the customer after installation.
After installation, carefully and thoroughly check the grab bars and make sure
that they are securely mounted because loose grab bars can fall from the wall
and cause injuries.
Use all screws provided to properly mount the grab bars; improperly installed
grab bars can become unstable and loose, causing injuries.
Grab bars must be mounted to a secure wall, which has sufficient structural
strength so that they will not become unstable and loose and cause injuries. If
the wall is thin, reinforce it with a ½” (12mm) plywood or 2x4 studding before
installation. ASTM F446 should be referred for further information.
Please use the attached wall screws to mount the products.
If product is not properly installed and screws are not securely tightned, you
may be hurt when it becomes loose.
stable
Soiree™ and Guinevere™ Grab Bars must be mounted to a secure surface. TOTO® is not responsible for any consequences
caused by improper installation and/or lack of wall strength. It is the responsibility of the installer of the grab bars to make sure
that the mounting area the customer chooses is secure and that proper mounting hardware is used for installation.
Product Specifications
Product Number Product Description
Soiree ™
Guinevere ™
Item
YG96024#CP
YG97024#CP
YG96042#CP
YG97042#CP
24” Grab Bar
24” Grab Bar
42” Grab Bar
42” Grab Bar
Installation and Owner`s Manual
®
Finish*
Polished Chrome
Polished Chrome
Polished Chrome
Polished Chrome
* Other available finishes are mentioned in the manual.
2007.01
0GU3015
1

Summary

Important Safeguards

Symbols and Meanings

Explains safety symbols and their meanings used in the manual for safe product operation.

Important Installation Notes

Provides crucial notes regarding secure mounting, wall strength, and hardware for safe grab bar installation.

Product Specifications

Tools and Materials

Recommended Tools

Lists essential tools required for the proper installation of the grab bars.

Installation of Grab Bars

Determine Location and Drill Holes

Guides on identifying secure wall locations and drilling pilot holes for mounting.

Attach Product and Insert Cover

Covers securing the grab bar with screws and inserting the decorative covers.

Cleaning Instructions

General and Dirt Cleaning

Explains using a damp soft cloth for general cleaning and diluted detergent for dirt.

Cleaning Cautions

Warns against abrasive cleaners or brushes that can damage the grab bar surface.

Warranty Information

Toto Soiree Specifications

General

Toilet Type	Two-Piece
Bowl Shape	Elongated
Material	Vitreous China
ADA Compliant	Yes
Trip Lever Position	Left
WaterSense Certified	Yes
Type	Toilet
Flush System	Tornado Flush
Water Consumption	1.28 GPF
Water Use	1.28 GPF
Flush Volume	1.28 GPF
Width	19.5 inches
Trapway Size	2.125 inches
Rough-in	12 inches
Rough-In Size	12 inches