Touchstone 80024 - Parts and Hardware; Installation and Assembly; Wall Mounted Installation

4
Parts and Hardware
A – Fireplace ( 1 )
B-Wood Screws(7)
C-Drywall anchors(7)
G-Plastic Tray(1)
RC – Remote Control (1)
D-Fixing part
F - Decorative Crystals
Installation and Assembly
Wall Mounted Installation
Rear View of Fireplace
Step 1. Find a safe location.
Minimum clearance on each side:
12” (30 cm).
Minimum clearance below: 6”
(15 cm).
Minimum clearance above: 12”
(30 cm).
Minimum clearance from the front
and sides: 3 feet (90 cm).
Choose a location near an outlet so
an extension cord is not required.
DO NOT position the unit directly
below a power outlet.
See Safety Information on pages
2 and 3 for warnings about safe
placement, safe installation, and
proper use of this product.
NOTICE
The wall mount fasteners included with this fireplace are for use ONLY with a
wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder
blocks, or other wall types, consult a professional for the best attachment methods.
12”
(30 cm)
12”
(30 cm)
Minimum 12”
(30 cm)
Minimum 6”
(15cm)