TOUGHBUILT S510 - Safety; General Safety Instructions for Tools

DESIGNATION / EXPLANATION
Weight
Wear gloves to reduce risk of injury
Alerts used for warning messages
To reduce the risk or injury, read and
understand operator’s manual
Operation of power tool can result in
foreign objects being thrown into eyes
Use of this tool can generate dust which
may cause respiratory injury
Noise from this product can contribute to
hearing loss
SAFETY
GENERAL SAFETY INSTRUCTIONS FOR TOOLS
Using tools of any kind can be dangerous if safe operating
procedures are not followed. Recognising the hazards of each tool and
using them with respect and caution will considerably limit the possibility
of personal injury. However, if safety precautions are ignored, personal
injury will likely result. Always use common sense; your personal safety
is your responsibility.
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols, and explanations with them, deserve your careful attention
and understanding. The symbol warnings do not by themselves eliminate any
danger. The instructions and warnings they give are no substitutes for proper
accident prevention measures.
! WARNING
BE SURE TO READ AND UNDERSTAND ALL SAFETY INSTRUCTIONS IN THIS
MANUAL, INCLUDING ALL SAFETY ALERT SYMBOLS SUCH AS “DANGER”,
“WARNING” AND “CAUTION”, BEFORE USING THIS TOOL. FAILURE TO FOLLOW ALL
INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS PERSONAL INJURY.
! DANGER
Failure to obey this warning WILL result in death
or serious injury to you or to others. Always follow
the safety precautions to reduce the risk of
personal injury.
Safety alert symbol: Indicates DANGER, WARNING,
or CAUTION. May be used in conjunction with other
symbols or pictographs.
! WARNING
Failure to obey this safety warning CAN result in
death or serious injury to you or to others. Always
follow the safety precautions to reduce the risk of
personal injury.
! CAUTION
Failure to obey this safety warning MAY result in
personal injury to you or others or property damage.
Always follow the safety precautions to reduce the
risk of personal injury.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Know your tool. Read and understand the Operator’s Manual and observe the
warnings and instruction labels affixed to the tool.
Properly ground all tools.
Keep guards in place.
Remove adjusting keys and wrenches.
Keep work area clean and dry.
Keep children away.
Never leave running machines/tools unattended.
Disconnect tools for service.
Use correct tools for the job.
Never force a tool.
Wear safety apparel.
Wear safety glasses/goggles.
Never stand or sit on tools.
02
© COPYRIGHT 2018 TOUGHBUILT INDUSTRIES INC.