Safety and Instruction Manual
7
Helpline: +44 (0) 844 984 0055
USING YOUR APPLIANCE
Start/Cancel Button
1. Press MENU button to choose one program, then press START/
CANCEL button.
2. The LCD will display
, then chosen menu program will start to
work.
3. After 5 seconds, the LCD will display the remaining cooking time,
and then 5 seconds later will display
, cycle will stay like this
till cooking time finished.
4. After cooking has finished, the cooker will automatically enter the
keep warm function
5. To stop cooking, press START/CANCEL button, the cooker will
enter into standby mode. The menu program will not work in this
mode. After one minute, the LCD will display
.
After five minutes, the LCD will power down, however the cooker
will still have power.
Menu Button
1. Press MENU button.
2. The menu button light will switch on, and at the same time, the first
menu program light will switch on.
3. Press the MENU button again to choose one program.
4. The LCD will show the set cooking time.
5. Press START/CANCEL button, your cooker will then start the
selected program, indicated by the program light.
Temperature
1. Press the MENU button to choose one program.
2. If the chosen program allows for adjusting temperatures, then press
TEMPERATURE button, the temperature function light will flash.
3. Press the TEMPERATURE button again to adjust the temperature,
press one time to decrease the temperature by 5 degrees.
A longer press will decrease the temperature by 10 degrees.
4. Once you have decreased the temperature to 40 degrees, press
the TEMPERATURE button again to return the cooker to 170
degrees, then start to decrease to 40 degree if keep pressing
TEMPERATURE
5. After adjusting, press START/CANCEL button and your cooker will
start to work.
To Next Page
Loading...
