10
USING YOUR AIR FRYER
TURNING THE APPLIANCE ON
1. Plug the unit into a mains socket. This
will put the unit into standby mode.
Press the
icon to turn on the
appliance, once pressed the
1
and
2
indicators will light up to show the unit
is on.
2. Once the unit is out of Standby mode,
press either or both of the
1
and
2
drawer selection keys to activate the
control panel for the corresponding
drawer(s).
NOTE! If there is a power cut or the unit is
unplugged during operation all indicator
lights will go off. Once connection is
re-established the unit will continue to
operate on the previously selected settings.
AUTO-OFF FUNCTION
1. When cooking is not in progress, the
appliance will automatically go into
Standby mode if there has been no
contact with the control panel for
10 minutes. The
key will remain
illuminated, but all other indicators as
well as the LED display will go out to
show the unit is in Standby mode.
2. Press the
key while the unit is in this
state to bring it out of Standby mode.
The
,
1
and
2
indicators will light up
to show the unit has been taken out of
Standby mode.
3. Once the unit is out of Standby mode,
press either or both of the
1
and
2
drawer selection keys to activate the
control panel for the corresponding
drawer(s).
START/PAUSE
1. Once the appropriate function or time
and temperature have been set touch
the
key. All other program indicators
will go out, and the unit will begin to
operate on the selected settings.
2. To pause the unit while it is in operation,
press the
key. The indicator, the
digits on the LED display and the
indicators for the currently selected
all program indicators will come on
and remain static, to show the unit is
paused.
SETTING THE TEMPERATURE
1. Touch the key to activate the
Temperature Selection function
on either or both drawers. The
corresponding indicator will illuminate
and the time and temperature digits
to show this function has been selected.
2. Once the Temperature function has
been activated, press the + and - keys on
the corresponding side of the air fryer to
adjust the temperature by increments
of 5, from 80 to 200 degrees Celsius.
Short press each key to adjust this
setting gradually or press and hold to
change the time more quickly.
3. If required, repeat this process for
the other drawer. Once the correct
temperature for each drawer is set,
press the
key to start the cooking
process. The unit will automatically
begin to operate at the latest selected
settings.
NOTE! The temperature can be changed
during operation.
SETTING THE TIMER
1. Touch the key to activate the Timer
function on either or both drawers. The
corresponding indicator will illuminate
and the time and temperature digits
to show this function has been selected.
To Next Page
Loading...
