12
Before Cooking:
The LED flashes 3 times when plugged in to the power supply. Then it flashes “:”,
prompting you to input the cooking menu and time.
Time/Weight Dial:
Turn the dial to enter the oven clock time or input cooking time.
Rotate to specify food weight or number of servings.
Pause/Cancel:
At the initial or input stage: press once to cancel in-putted programs and resume the
initial stage.
During cooking: press once to stop oven operation, press twice to cancel cooking
programs.
Auto Reminder:
When your preset cooking procedure has finished, the LED Display will show End and
three beeps will be heard to prompt you to take out your food. If you do not press
Pause/Cancel button once or open the door, the beep will be sounded at an interval of
3 minutes.
Instant Cooking:
On the standby status, press Instant/Start button, the oven will start cooking with high
power; The system default cooking time is 1 minute. You can increase or decrease
cooking time by turning the dial.
Clock Setting:
Clock button allows you to input the current or a preset time when “:” flashes onto the
LED display after plugging in, or to skip it over it and continue if unnecessary.
Example: to set the timer to 12:30.
Steps Display
1 After power-up, the colon flashes. 1:00
2 Press and hold Defrost/Clock button for 3 seconds. 1:00
3 Turn Time/Weight dial to set exact hours. 12:00
4 Press Defrost/Clock button once again. 12:00
5 Turn Time/Weight dial to set exact minutes. 12:30
6
Press Defrost/Clock button once again or wait for 60 seconds, and
the numbers will go steadily.
5 - Using Your Appliance
To Next Page
Loading...
Need help?
General
