Why is my Tower Hobbies Vacuum Cleaner not picking up?
If your Tower Hobbies Vacuum Cleaner isn't picking up debris or the suction power seems weak, the dust container might be full, or the filters may need cleaning. Empty the dust container and clean the filters.
What to do if my Tower Hobbies XEC10 will not work?
If your Tower Hobbies Vacuum Cleaner isn't working, the vacuum may have run out of charge, so charge it fully. Also, this vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the suction motor off. Should this occur, allow it to cool for 1 hour, then empty the dust container and clean all of the filters.
Why is dust escaping from my Tower Hobbies Vacuum Cleaner?
If dust is escaping from your Tower Hobbies Vacuum Cleaner, it might be because the filter isn't installed correctly, or the dust container is full. Empty the dust container and refit the filter.
General| Brand | Tower Hobbies |
|---|---|
| Model | XEC10 |
| Category | Vacuum Cleaner |
| Language | English |
Lists items included in the product packaging.
Identifies key components of the vacuum cleaner.
Details model, voltage, and power.
Lists relevant product legislation and directives.
Covers voltage check, damaged cords, cord handling, and accessory usage.
Addresses supervision, child usage, and user maintenance.
Covers pets, carpet types, flammable liquids, and moving parts.
Details pick-up restrictions, immersion, outdoor use, and thermal cut-out.
Guides on unpacking, checking parts, and responsible packaging disposal.
Details connecting parts and securing the handle.
Explains how to adjust the telescopic pole length.
Addresses power issues and motor overheating.
Covers full dust containers and filter cleaning.
Explains potential causes like incorrect filter or dust tank fitting.
Information on proper disposal of electrical items.
Step-by-step guide to remove and empty the dust container.
Instructions for cleaning the appliance exterior safely.
Advice on storing the appliance when not in use.
Explains wire colours and terminal connections for UK plugs.
Details fuse rating and replacement for UK plugs.
Guidance on handling and replacing non-rewireable plugs.
Details the initial 12-month warranty.
Explains how to register for an additional 2 years.
Lists terms and conditions for warranty validity.
To Next Page
