Fig. 74: Inspecting Gear Synchronizer Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Check again the braking effect of the synchronizer ring.
d. Using a feeler gauge, measure the clearance between the synchronizer ring back and spline end.
Minimum clearance:
3rd gear: 0.65 mm (0.0256 in.)
4th gear: 0.75 mm (0.0295 in.)
NOTE: Ensure the fine lapping compound is completely washed off after
rubbing.
2005 Toyota RAV4
2005 TRANSMISSION Manual Transaxle - RAV4
Microsoft
Tuesday, July 21, 2009 9:47:23 AM Page 81 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...
