110
1-7. Safety information
Removing a child restraint installed with a seat belt
Push the release button and fully
retract the seat belt.
Installation with child restraint lower anchorages
Vehicles with reclining type rear seat: Adjust the seatback to
the most upright position.
Type A
Widen the gap between
the seat cushion and
seatback slightly.
Latch the hooks of the
lower straps onto the
anchors.
If the child restraint has a
top strap, the top strap
should be latched onto the
anchors.
For owners in Canada:
A symbol on a child restraint sys-
tem indicates the presence of a
lower connector system.
To Next Page
Loading...
