181
3-2. Using the audio system
3
Interior features
Random playback
n Current CD
Press (RAND).
Tracks are played in a random order until is pressed once more.
n All CDs (type A with a CD changer and type B)
Press and hold (RAND) until you hear a beep.
Tracks on all loaded CDs are played in a random order until is
pressed once more.
Switching the display
Press .
Each time is pressed, the display changes in the order of Track
no./Elapsed time→CD title→Track name.
n Display
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1 sec-
ond or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed for
6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
n Canceling random, repeat and scan playback
Press
(RAND), (RPT) or again.
To Next Page
Loading...
Need help?
General
