PRIUS_OM_OM47A29U_(U)
113
2. Instrument cluster
2
Instrument cluster
■ Outside temperature display
● In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.
• When stopped, or driving at low speeds (less than 12 mph [20 km/h])
• When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
● When “-” or “E” is displayed, the system may be malfunctioning.
Take your vehicle to your Toyota dealer.
■ Distance to empty
● This distance is computed based on your average fuel consumption. As a
result, the actual distance that can be driven may differ from that displayed.
● When only a small amount of fuel is added to the tank, the display may not
be updated.
When refueling, turn the power switch off. If the vehicle is refueled without
turning the power switch off, the display may not be updated.
■ Switching the driving mode (P. 320)
*: The animation displayed when the driving mode is switched can be turned
off in the “Meter Customize” settings. (P. 142)
When the driving mode is switched, the
driving mode indicator changes and an
animation
* is displayed on the multi-infor-
mation display.
Also, the background color of the main
display, energy monitor (P. 11 7 ) and
Hybrid System Indicator (P. 119)
change as follows.
Driving modes Background color
Normal mode Green
Power mode Red
Eco drive mode Blue
To Next Page
Loading...
