Toyota 2016 Prius - Operating Homelink

558
PRIUS_OM_OM47A29U_(U)
6-4. Using the other interior features
■ Programming an entry gate (for U.S.A. owners)/Programming a
devices in the Canadian market
Place the remote control transmitter 1 to 3 in. (25 to 75 mm)
away from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light in view while programming.
Press and hold the selected HomeLink
®
button.
Repeatedly press and release (cycle) the remote control trans-
mitter for 2 seconds each until step 4 is completed.
When the HomeLink
®
indicator light starts to flash rapidly,
release the buttons.
Test the HomeLink
®
operation by pressing the newly pro-
grammed button. Check to see if the gate/device operates cor-
rectly.
Repeat the steps above to program another device for any of the
remaining HomeLink
®
buttons.
■ Programming other devices
To program other devices such as home security systems, home
door locks and lighting, contact your Toyota dealer for assistance.
■ Reprogramming a button
The individual HomeLink
®
buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the “Reprogramming
a HomeLink
®
button” instructions.
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
light should come on.
The HomeLink
®
compatible transceiver in your vehicle continues to send a
signal for up to 20 seconds as long as the button is pressed.
Operating HomeLink
®
1
2
3
4
5
6