Toyota 4Runner 2021 - Page 98

96
2. Instrument cluster
4RUNNER (U)
■
Setting items
● LDA (Lane Departure Alert)
Select to set up LDA. (P. 556)
• Alert sensitivity
• Sway warning
• Sway sensitivity
● PCS (Pre-Collision System)
Select to set the following items. (P. 257)
• PCS on/off
• PCS sensitivity
● Intuitive parking assist (if equipped)
Select to set the Intuitive parking assist on/off
● Vehicle settings
“TPWS” (Tire Pressure Warning System) (P. 425)
•“Set Pressure”
Select to initialize the tire pressure warning system.
• “Change Wheel Set”
Select to register the ID codes of the tire pressure sensors to
the tire pressure warning system.3
● Meter settings (P. 555)
Select to set the following items.
• Language
Select to change the language on the display.
•Units
Select to change the unit for measure.
• Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
(
 P. 9 7)
• switch settings
You can register 1 screen as the top screen. To register, press
and hold while the desired screen is displayed.
• Pop-up display
Select to set the pop-up displays (P. 98), which may appear
in some situations, on/off.
• Initialization
Select to reset the meter display settings.