OVERVIEWSAFETY & EMERGENCY FEATURES
11
FEATURES & OPERATIONS
There are two types of control modes to accommodate various driving preferences.
Normal mode
Use for secure and smooth normal driving.
“TRACK” mode
Use for the feeling of added control and maneuverability. Press this switch and the
“TRACK” and “VSC OFF” indicators illuminate. To cancel and go back to normal
mode while in “TRACK” mode, press “TRACK” or “VSC OFF” switch again.
Refer to the Owner’s Manual for more details.
Hill-start Assist Control (HAC)
HAC helps to maintain braking force to assist starting off forward while facing uphill
or starting off backward while facing downhill. As HAC is initially disabled, enable
the system to make it operable. The enabled/disabled setting will be maintained the
next time the engine is started.
The hill-start assist control ON indicator will be illuminated when system is enabled
and flash while the system is operating.
To enable system, refer to the Owner’s Manual for limitations and more information.
MANUAL TRANSMISSION (IF EQUIPPED)
To Next Page
Loading...
Need help?
General
