37
Full-Speed Range
Dynamic Radar Cruise Control (DRCC)
TURNING SYSTEM ON/OFF
ADJUSTING SET SPEED
(3)
(1)
Push once: On
Push twice: Off
(2)
Refer to page 39 for switching to Constant Speed (Cruise) Control Mode.
Increase speed/Resume
1
Cancel
2
Decrease speed
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
1
The speed control may be resumed once vehicle speed exceeds 25 mph (40 km/h).
2
The speed control may also be canceled by depressing the brake pedal.
Vehicle will cruise at a set speed, decelerate to maintain selected distance from a
slower vehicle traveling in front and accelerate back up to the selected speed if the
vehicle in front changes lanes or speeds up.
(1) Push “
” to turn DRCC system ON. The “RADAR READY” and “ ”
indicator will come on the Multi-Information Display (MID).
(2) Use the steering wheel controls to increase speed by pushing “+RES” or
decrease the speed by pushing “-SET.” Push and hold to make a large
adjustment or push each time to make fine adjustments (1 mph [1.6 km/h] or 1
km/h [0.6 mph] increments).
(3) Push “Cancel” to cancel the speed control.
Intended for highway use, Full-Speed Range Dynamic Radar Cruise Control
(DRCC) lets you drive at a preset speed. The system is designed to function
between 0-110 mph* and uses vehicle-to-vehicle distance control, helping maintain
a preset distance from the vehicle ahead of you.*
* See Toyota.com/safety-sense for more information.
Refer to the Toyota Owner’s Manual for a list of additional situations in which the
system operation may be limited.
Display
Set speed
Dynamic Radar Cruise
Control vehicle-to-vehicle
distance button
Cruise control
switch
Indicators
To Next Page
Loading...
