251
4-5. Using the driving support systems
4
Driving
C-HR_OM_USA_OM10526U
Driving mode select
■ Changing the driving mode
To select the drive mode, perform operations on the multi-information
display.
Press “<” or “>” of meter control switches and select .
Press “∧” or “∨” of the meter control switches, and select “Drive
Mode”.
Press “∧” or “∨” of the meter control switches, and select drive
mode.
In response to driving conditions, one of 3 drive modes can be
selected.
Select the drive mode
1
2
3
To Next Page
Loading...
